1. NEW TRADE POLICIES COMING TO FORCE SOON: IMPORTANT READ!: READ HERE

Anal Depth Training? Wanting to hilt a L Rex.

Discussion in 'Help, Questions and How-To's' started by SatanSlut, Mar 26, 2019.

  1. SatanSlut

    SatanSlut New Member

    Joined:
    Feb 24, 2019
    Messages:
    24
    Likes Received:
    20
    I've been toying for a while but stopped for a LONG TIME and now all my practice is gone! :(

    I need some help with depth, does anybody have suggestions for toys to help me BD or non BD? I can't seem to get past the first sphincter just yet, do you know any toys that'll 'open me up'?

    Also for taking a Knot that big... what kind of advice could you give me? It's a little scary but i'ts honestly but ultimate goal haha

    I've been reading around the forums to similar threads but I wanted to know any thing else anyone could tell me from more experienced toyers
     
  2. Knotydes

    Knotydes Well-Known Member

    Joined:
    Aug 27, 2017
    Messages:
    322
    Likes Received:
    203
    BD has a few toys that are pretty much trainer; Winston's Tail, Ika and the new unicorn horn Mystic. all of them are long, tapered and reasonably girthy. Any of them should work well for you.

    Non BD there is SquarePeg https://www.squarepegtoys.com/ them have a lot of very nice toys for training. I have a Slink and i love it.

    there is also https://www.siliconenozzles.com/main.sc they make various different clean out nozzles in all range of sizes and lengths that can be ordered with or without a bore. I have a few nozzles from them and have been very happy with them, but I dont have any really long nozzles. I have been eyeing a few, but have yet to order one of them.

    As for general advice about depth play, practice, lots and lots of practice. If you have smaller long toys i would recommend practicing with them until you are very comfortable taking toys deeply. then get thicker and thicker toys until you are comfortable with each size.

    Rex is a bit of a difficult toy to knot. The toy is long enough that if you do manage to take its knot, if the tip isn't lined up with where it needs to go. when you do knot it, it will jab you very painfully. i can tell you this from first hand experience. Always warm up before attempting to knot Rex.

    Rex is a pretty fun toy once you get to used to it. Just takes a bit of practice.
     
    SatanSlut likes this.
  3. SatanSlut

    SatanSlut New Member

    Joined:
    Feb 24, 2019
    Messages:
    24
    Likes Received:
    20
    Thank you so much for all the advice!! I really appreciate it! I have a medium Ika on the way hopefully soon which will be a good start... I can knot a medium Rex with some effort so I'm just looking for the next step up! The knot is such a challenge but a delicious one. I bought him logn ago for his pretty-ness and never expected much use but damn, I keep getting closer and it's so tempting...

    What nozzles could you recommend to me?

    And what firmness is your Rex just out of my curiosity?

    Thank you so much for answering my questions!!
     
  4. Knotydes

    Knotydes Well-Known Member

    Joined:
    Aug 27, 2017
    Messages:
    322
    Likes Received:
    203
    Even if you cant knot Rex, its shaft feels amazing to just thrust with/ride. the shape is just wonderful.

    my Rex is in medium. I enjoy toys on the firmer side of things. Plus when i got my Rex, let just say thats its knot wasn't really a challenge for me to take, but the toy did cause me to seriously start training for depth play.

    their site has a lot of different styles of nozzles/toys i can really recommend anything in particular since I dont know your tastes or needs are in the clean out department. I just cruised around the site with a vague idea of what i needed until i found something that caught my eye and gave it a try.

    I can recommend one of the double ball retainers https://www.siliconenozzles.com/Retaining-Ball-Enema-Nozzles_c56.htm they come in various thicknesses. i have the 3XL version and it has become a constant in my clean out routine. this nozzle has made it very easy for me to quickly and reliably clean out. Also due to its shape and size it can make for a enjoyable toy.

    I also have https://www.siliconenozzles.com/Sho...inged-Bumps-Enema-Colon-Nozzle-SHWRSHTR-9.htm this is what start off with. it gets the job done.

    the nozzles i have been looking at recently are the very long colon tubes. since they are very long and i am always looking to explore my limits. I am undecided on what I want/what i can take. very complicated :D

    I'm glad to help.
     
    SatanSlut likes this.
  5. Knot My XL Rex

    Knot My XL Rex New Member

    Joined:
    Mar 18, 2019
    Messages:
    25
    Likes Received:
    3
    I have an XL Rex, with mine, the trick really is thoroughly clean yourself out, plenty of lube I side you, and outside atleast the diameter of the knot, lots of lube on Rex, then, take the shaft, the key to depth really is making sure yoyre getting lube in there nice and deep so rex can slide nicely, and secondly you need to be completely relaxed or your muscles will prevent Rex from going further, hes best taken sideways, if hes upside down like doggystyle or upright like missionary then hes much more difficult to take, my favorite method is getting nicely lubed up, take his shaft, turn his sideways, and sit on him but not with full body weight, make sure his shaft is actually pointing into you and not bent or the pressure wont do anything, then just sit and relax, his own firmness will try and straighten himself back out, and since you're relaxing, you'll stretch nicely without pain, every time you exhale your muscles loosen and tighten when you breath in, so as you sit on him relaxed, when you breath you should feel him now and then slide in a bit further, the second sphincter opens pretty easy with Rex just dont add to much pressure and relax, back off a little then back on, you'll know if it opens or not, dont be afraid to take him out, and relube yourself and rex, the more lube the easier it is, if you feel discomfort just lift off a little then try sitting back down again, for me it takes about 10-20minutes of solid sitting on him relaxed till he pops iI, so watching a film usually helps pass time, NEVER EVER rush the knot, you'll regret it if you rush it, you can tear a vessel and cause bleeding for a full night and soreness for a few days, or even worse if you rush if and dont have enough lube.
    but if you're new he may take up to a hour, or if youre super tight he might take a few sessions so dont be disappointed if you only manage one side of his knot. once you get past his half way point though if you squeeze he usually just sucks right in to his spot and is nicely snug, I do warn you though, the first few times you knot him are pretty intense, after a few times though he just pops In and locks right in place, hes pretty easy to turn inside you too to a upright or upside down position, he really locks i. those two possitions you'll know what I mean when you turn him.

    As for stretcher toys for preparing to take XL toys my favorite is the XL Winston Tongue in a Soft firmness, starts small and gradually becomes 4 inches, hes got an amazing tongue texture too.

    and as always relax, breathe, patience, and LUBE LUBE LUBE!!!
     
    SatanSlut likes this.
  6. Knot My XL Rex

    Knot My XL Rex New Member

    Joined:
    Mar 18, 2019
    Messages:
    25
    Likes Received:
    3
    almost forgot, if you feel like hes not going in, try adding some mini bounces on him, usually works pretty well.
     
    SatanSlut likes this.

Share This Page